Upload to Radio Greyed Out on Chirp
It makes sense that your handheld radio should be able to accept the place of multiple radios.
Desire to add all the channels you demand quickly and easily? Allow's program a Baofeng UV-5R Radio with CHIRP software to go the task done.
Program a Baofeng UV-5R Radio with CHIRP
The Baofeng handheld radios are inexpensive but cover many frequencies, making them the Swiss Regular army Knives of the budget ham radio community.
We're going to plan a Baofeng radio with CHIRP software . CHIRP is free open up source software anyone can download.
It's used for programming a wide range of amateur radios of different makes and models, and in multiple formats and data sources. Information technology offers an like shooting fish in a barrel to employ interface uniform with Windows, Mac, and Linux PC'due south.
The BaoFeng UV-5R, is an amazing, yet economically priced radio. Information technology tin can cover a multitude of channels and frequencies. In this post w
The Bands Covered (Not all of these are legal to broadcast on, but listening should exist fine – see FCC Part 95 Rules)
- ii Meter
- 70 cm
- FRS (Family Radio Service)
- GMRS (General Mobile Radio Service)
- MURS (Multi-Use Radio Service)
- Marine VHF
- Public service Frequencies
- NOAA Weather Band
- FM radio (listen only)
That is quite a list of frequencies. While it'south not legal to transmit on all these frequencies if you are not a HAM or if the device isn't approved on the FCC Part 95, that really won't apply after SHTF. I'd take an FCC fine over expiry whatsoever twenty-four hours!
Preparing to Program Your BaoFeng
Software
I recommend CHIRP, to program your BaoFeng, and then this post will refer to that software. CHIRP is available for Windows, Mac OS and Linux, so regardless of your operating arrangement, you are covered.
Download the version you need and install information technology.
Programming Cable
Before you tin plan your radio with CHIRP, you'll demand the BaoFeng USB programming cablevision.
Be sure you buy a cable from a reputable dealer and not a cheap knock off, or you will take chances frying something.
I recommend the above cable since it is sold by BaoFeng and works cracking with the included FTDI chipset.
This cable is plug'n play and should not require split up drivers, merely some other option is to download the drivers over at Miklor.com, (an awesome BaoFeng informational page).
Download and install the proper drivers for your USB cable (probably Prolific).
Programming Your BaoFeng
Footstep 1
Open/Run CHIRP, connect your BaoFeng and plug it into an USB port on your computer.
First you'll need to pull a copy of the existing config from your radio to your computer.
In CHIRP, select RADIO > Download From Radio
Yous'll need to requite CHIRP some information nigh your radio and what COM Port (or which /dev/XXXX in Linux and Mac OS) it'southward connected to.
Once this stride has been completed, it should list any channels that yous accept already programmed into memory.
Side Tip: If you are using a UV-5R variant keep in mind this configuration setting volition cover a number of the variants (such equally UV-5RE Plus).
If there is defoliation on this, you can notice which models are covered and which you lot should pick on the CHIRP website.
Step ii
Now in CHIRP go to FILE > Open Stock Config and Select the group of channels that you'd like to add to your BaoFeng (This seems to be missing on the Mac Bone version of CHIRP, fear not, I've included near of these "channels" in baofeng-freqs.csv )
In this screenshot, I accept opened Marine VHF Channels
You can select the channels or all channels using the hot-key combinations for your OS
Windows (and most Linux systems unless you've remapped stuff)
- Select all = CTRL + A (keys on your keyboard)
- Select private Channels = CTRL + mouse click
- Select Range of Channels = Mouse click to highlight start then, SHIFT + mouse click on the last in the range that y'all'd like to select
Then CTRL + C (or EDIT > Copy ) to re-create the selected channels
Side Tip: To import from other data sources other than from the stock config, go to Radio from the radio drop downwardly and select Import from other data sources.
Some options available may be RadioReference.com, RepeaterBook, RFFinder, etc. RepeaterBook is the easiest way to import repeater info for your location.
Step 3
Switch back to your BaoFeng Tab
Click on the beginning unoccupied channel so select EDIT > PASTE (or CTRL + V) to paste in the previously copied channels from the Stock Config into your Radio'due south Config
Stride iii-A
If yous you don't accept plenty aqueduct slots, you can add together more than (Baofeng supports up to 128 memory channels, 0-127)
This is how my BaoFeng Config looks later on adding FRS, GMRS, MURS, Marine VHF, and NOAA weather condition (Annotation: channel 0 is not programmed and channel i is my local HAM club's repeater)
Side Tip: Since information technology is illegal to transmit from a BaoFeng using FRS and GMRS simply you still wanted to import those channels for receiving, you can disable transmission capabilities.
To proceed, click (none) nether the Duplex column for frequency you want to disable TX. Then select off from the drop downwardly box.
This will ensure you never accidentally TX on these channels, while all the same allowing you lot to receive.
Step iv
Now you but have to upload this config back to your radio. Select RADIO > Upload to Radio and CHIRP will write it to your BaoFeng's memory.
Use the same configuration settings that were used during the initial clone (we did above). Yous'll see receive lite instead of a send indicator light.
To verify the radio is programmed, switch to Channe/Memory mode, then go up to A frequency and y'all should be able to whorl through and view the frequencies you added.
Culling Options for the not-nerdy
- You lot yet need to practise Step i (download your radio's config) higher up
- Download this config (minus my Local Repeater): baofeng-freqs.csv
Remember where you downloaded this file to (Desktop?). - Perform Step 3A to adjust the number of channels, y'all'll demand to set this to sixty or 61.
- Then in CHIRP Select FILE > Import and import that baofeng-freqs.csv file that you just saved someplace (I told you lot to remember where you saved information technology)
- Now do Step iv from above to write this config to your Baofeng
Now your trusty BaoFeng UV5R has all the FRS, GMRS, MURS, Marine VHF and NOAA weather channels programmed in information technology and you still have 68 channels left for your 2 Meter and lxx cm frequencies.
I suggest that you lot pick up a copy of the ARRL Repeater Directory and program in some of the repeaters in your area!
Hopefully, this guide has helped you program your BaoFeng using CHIRP and you are left with fewer questions and more knowledge.
Source: https://geekprepper.com/program-a-baofeng-radio-with-chirp/
0 Response to "Upload to Radio Greyed Out on Chirp"
Post a Comment